Hmmmm Feedback anyone....

terminal pharmacy · 08.17.2006, 03:23 AM

instructions ofr making a microphone with a 6 inch or bigger or smaller diaphragm....

what you need -

car speaker 2 - 8 ohm
canare two core or star quad cable
neutrik tip sleeve jack

.....

strip an inch from the sleeve around the cable exposing the wires - should be one blue one white plus a shield. get rid of the paper and string.

don't forget the boot

solder the white wire to the tip part of the jack
solder the blue and the shield to the sleeve

then at the other end solder the white to the positive pole and the blue to the negative pole.

plug it all into your fx and your amp and you will have hours of glorious feedback stimulation with your new microphone.......

sonic sphere · 08.17.2006, 07:12 AM

yes please

Tokolosh · 08.17.2006, 08:06 AM

That's cool terminal!

terminal pharmacy · 08.17.2006, 06:04 PM

nomadicfollower · 08.17.2006, 08:03 PM

Did you come up with that yourself?

I'll probably try that. I just bought a soldering iron hoping I could do some circut bending or something, so this should be something good to start with.

terminal pharmacy · 08.17.2006, 08:13 PM

i tried a pair of headphones into my amp once and that worked so i thought i would see what else would. the thinner the material the cone is made of the better. i'm gonna try an 18" sub driver soon

nomadicfollower · 08.17.2006, 08:24 PM

Yeah, I've thought about the headphone microphone, as well, but I've never done it. I also want to make a contact mic (is that what the headphones make?).

terminal pharmacy · 08.17.2006, 08:30 PM

no, headphones just make a normal microphone, o contact microphone has to be physically in contact with what ever you are miciing to pic up the vibrations.

08.17.2006, 03:23 AM	#1
terminal pharmacy invito al cielo Join Date: Mar 2006 Location: Australia Posts: 3,358	instructions ofr making a microphone with a 6 inch or bigger or smaller diaphragm.... what you need - car speaker 2 - 8 ohm canare two core or star quad cable neutrik tip sleeve jack ..... strip an inch from the sleeve around the cable exposing the wires - should be one blue one white plus a shield. get rid of the paper and string. don't forget the boot solder the white wire to the tip part of the jack solder the blue and the shield to the sleeve then at the other end solder the white to the positive pole and the blue to the negative pole. plug it all into your fx and your amp and you will have hours of glorious feedback stimulation with your new microphone.......
	\|QUOTE AND REPLY\|

08.17.2006, 07:12 AM	#2
sonic sphere invito al cielo Join Date: Mar 2006 Location: Ireland Posts: 4,446	yes please __________________ "trolling asshat" - All Hail WATT "wanker" - All Hail WATT
	\|QUOTE AND REPLY\|

08.17.2006, 08:06 AM	#3
Tokolosh invito al cielo Join Date: Apr 2006 Location: Plaza de Toros Posts: 6,731	That's cool terminal! __________________ Anything you can /imagine is real
	\|QUOTE AND REPLY\|

08.17.2006, 06:04 PM	#4
terminal pharmacy invito al cielo Join Date: Mar 2006 Location: Australia Posts: 3,358
	\|QUOTE AND REPLY\|

08.17.2006, 08:03 PM	#5
nomadicfollower invito al cielo Join Date: Mar 2006 Location: North America Posts: 2,672	Did you come up with that yourself? I'll probably try that. I just bought a soldering iron hoping I could do some circut bending or something, so this should be something good to start with.
	\|QUOTE AND REPLY\|

08.17.2006, 08:13 PM	#6
terminal pharmacy invito al cielo Join Date: Mar 2006 Location: Australia Posts: 3,358	i tried a pair of headphones into my amp once and that worked so i thought i would see what else would. the thinner the material the cone is made of the better. i'm gonna try an 18" sub driver soon
	\|QUOTE AND REPLY\|

08.17.2006, 08:24 PM	#7
nomadicfollower invito al cielo Join Date: Mar 2006 Location: North America Posts: 2,672	Yeah, I've thought about the headphone microphone, as well, but I've never done it. I also want to make a contact mic (is that what the headphones make?).
	\|QUOTE AND REPLY\|

08.17.2006, 08:30 PM	#8
terminal pharmacy invito al cielo Join Date: Mar 2006 Location: Australia Posts: 3,358	no, headphones just make a normal microphone, o contact microphone has to be physically in contact with what ever you are miciing to pic up the vibrations.
	\|QUOTE AND REPLY\|